Publications
[2019-Vol.16-Issue 5] Bionic Flapping Pectoral Fin with Controllable Spatial Deformation
发布时间: 2019-11-06 14:11  点击:2746

Journal of Bionic Engineering

September 2019, Volume 16, Issue 5, pp 916–930| Cite as

Yueri Cai,Lingkun Chen,Shusheng Bi,Guoyuan Li,Houxiang Zhang

1.Robotics Institute,Beihang University,Beijing,China

2.Department of Ocean Operations and Civil Engineering,Norwegian University of Science and Technology,Aalesund,Norway

Abstract

This paper presents the design of a bionic pectoral fin with fin rays driven by multi-joint mechanism. Inspired by the cownose ray, the bionic pectoral fin is modeled and simplified based on the key structure and movement parameters of the cownose ray’s pectoral fin. A novel bionic propulsion fin ray composed of a synchronous belt mechanism and a slider-rocker mechanism is designed and optimized in order to minimize the movement errors between the designed fin rays and the spanwise curves observed from the cownose ray, and thereby reproducing an actively controllable flapping deformation. A bionic flapping pectoral fin prototype is developed accordingly. Observations verify that the bionic pectoral fin flaps consistently with the design rule extracted from the cownose ray. Experiments in a towing tank are set up to test its capability of generating the lift force and the propulsion force. The movement parameters within the usual propulsion capabilities of the bionic pectoral fin are utilized: The flapping frequency of 0.2 Hz–0.6 Hz, the flapping amplitude of 3°–18°, and the phase difference of 10°–60°. The results show that the bionic pectoral fin with actively controllable spatial deformation has expected propulsion performance, which supports that the natural features of the cownose ray play an important role in designing and developing a bionic prototype.

Keywords

cownose ray bionic pectoral fin controllable deformation multiple fin rays propulsion performance 

Full text is available at :

https://link.springer.com/article/10.1007/s42235-019-0106-4

Address: C508 Dingxin Building, Jilin University, 2699 Qianjin Street, Changchun 130012, P. R. China
Copyright © 2024 International Society of Bionic Engineering All Rights Reserved
吉ICP备11002416号-1